Consumer
Products
Bluetooth® Hi-Fi adapter

Bluetooth® Hi-Fi adapter

Bluetooth® music receiver, For smartphone, tablet AEA2000/37

Troubleshooting

How to connect my Philips Bluetooth adapter to speaker?

The connection between the speaker and your Philips Bluetooth Hi-Fi adapter depends on the connection available in the speaker. See the connection steps below:

RCA cable

You will need the RCA-audio cable (supplied with the product)

RCA cable

If there is stereo audio connection from the Hi-Fi speaker

  1. Connect stereo audio side of the RCA audio cable to RCA audio connector on the speaker
    Note: connect the red jack to the red connector; and white jack to the white connector.
  2. Connect the other end of the cable to LINE OUT connector on the adaptor
Stereo audio connection

If there is AUDIO IN connection from the Hi-Fi speaker

  1. Connect the audio side of the RCA audio cable to AUDIO IN connector on the speaker
  2. Connect the other end of the cable to R and L connector on the adaptor
    Note: connect the red jack to the red connector; and white jack to the white connector.
AUDIO IN connection

You can pair your smartphone or tablet to the Bluetooth Hi-Fi adapter for music streaming via Bluetooth connection

If you wish to pair your PC to the Bluetooth Hi-Fi adapter via Bluetooth connection, drivers are often needed. Please consult the manufacturer of your PC for the Bluetooth driver.

If the above does not help, contact our consumer support for further assistance.

The information on this page applies to the following models: AEA2000/37 .

Not what you are looking for?