Consumer
Products
Pronto Home Theater Control Panel

Pronto Home Theater Control Panel

TSU3500/17

Troubleshooting

How to check the firmware version of a Philips theater?

Depending on your version of the firmware there are two different ways:

1) Firmware version prior to 3.x:

  • Turn on your Pronto NG and press the pronto icon
  • If your screen is stating on top Settings 1/3, then your version is prior 3.x, and you can continue with these instructions, otherwise follow the steps for a firmware version starting of 3.x
  • Press the page up button
  • Your screen on top indicates now Settings 3/3
  • Find the line Application version
  • The number on the end of this line indicates your version. E.g. 2.1.5

2) Firmware version starting from 3.x:

  • Turn on your Pronto NG and press the pronto icon for 3 seconds
  • If your screen is stating now on the top Tools and there is a dark grey settings button. If this is not the case, then your version is prior 3.x, and you need to follow the instructions above
  • Press the settings button
  • Press the page up button
  • Your screen on top indicates now Settings 3/3
  • Find the line Application version
  • The number on the end of this line indicates your version. E.g. 3.1.9

The information on this page applies to the following models: TSU3500/17 , TSU3000 .

Not what you are looking for?

Did we answer your question?

If not, contact us.