Consumer
Products

Troubleshooting

How to select Analog/Digital Channels on a Philips DVDR?

You can easily switch the analog TV (NTSC) and digital TV (ATSC) with the remote control and enjoy viewing the HDTV (high definition TV) programs as well as the SDTV (standard definition TV) programs with simple operation.

Press [DTV/TV] on the remote control.

  • The analog mode and digital mode switch alternately.
  • When you press [DTV/TV] in external input, the analog mode and digital mode will be switched.

Selecting channels in Analog mode

Enter the channel number with [the Number buttons] to select a channel you want to watch.
e.g. To view Channel 2: ([0] + [2]) or ([2] + [•]) or ([2] + leave it for 2 seconds)

Selecting channels in Digital mode

Enter the major and minor channel number with [the Number buttons] to select a channel you want to watch.
e.g. To view Channel 2-2:

1) Select the major channel first : ([0] + [2]) or ([2] + [•]) or ([2] + leave it for 2 seconds). You can then use the channel up/down to select the minor channel.

OR

2) To select the minor channel directly : ([0] + [2] +[2]) or ([2] + [•] + [2])

If a channel is present in step 1, the set would take you to channel 2.1 first.

Note:

  • When you switch the analog mode to the digital mode, it may take about 10 seconds until the digital channel selection is completed
  • It may take up to 5 to 7 seconds to switch the digital TV channels. In digital TV broadcasting, two or more channels, called minor channels, are simultaneously broadcast on one main channel, otherwise called major channel.

The information on this page applies to the following models: DVDR3506/37 , DVDR3505/37 .

Not what you are looking for?

Did we answer your question?

If not, contact us.