Consumer
Products
digital widescreen flat TV

digital widescreen flat TV

107cm (42"), LCD, integrated digital 42PF5421D/37

Troubleshooting

What to do if I cannot hear sound from Philips TV when connecting to the AV1 input?

When you connect the accessory device to the AV1 input of the TV using component video cables (YPbPr) or composite video cable (Yellow), you must connect the audio output from the accessory device to the 'AV1 AUDIO IN L R' of the TV using the RCA audio cables (Red and White).If the connection is good,

Check to ensure that the AV1 audio source from the TV on-screen menu is selected to AV1.

  1. Press the 'MENU' button on the remote control.
  2. Press the cursor up/down to select SETUP and press the cursor right.
  3. Press the cursor up/down to select SOURCE and press the cursor right.
  4. Press the cursor up/down to select ANALOG AUDIO IN and press the cursor right.
  5. Press the cursor up/down to select AV1 and press the 'OK' button.
  6. Press the 'MENU' button to exit the menu.

Note: Make sure that the volume on the TV and on the device is set at an audible level and also that the sound hasn't been muted.

The information on this page applies to the following models: 42PF5421D/37 , 42PF7421D/37 , 50PF7321D/37 , 42PF7321D/37 , 32PF7421D/37 , 37PF7321D/37 , 42PF5321D/37 , 32PF7321D/37 , 26PF5321D/37 , 32PF5321D/37 . more less

Not what you are looking for?

Did we answer your question?

If not, contact us.