How to install and confirm the AquaClean filter usages on my Saeco Incanto
You can easily install the Saeco AquaClean filter yourself. Just follow these simple steps.
Step 1: Prepare the filter for use
Remove the filter cartridge from its packaging
Shake it for about 5 seconds
*Immerse the filter upside down in a jug with cold water and wait until no more air bubbles come
Step 2: Install the filter in the water tank
Insert the AquaClean water filter in the empty water tank. Insert the cartridge vertically onto the cartridge connection. (Fig. 2) Note: leave the small white water filter installed
Push the AquaClean water filter to the lowest possible point. To guarantee the best performance, make sure that the cartridge fits tightly and the seal is in the right position
Step 3: Rinse the installed filter cartridge.
Fill the water tank with fresh water and place it into the machine
Select hot water dispensing on the machine, and dispense half a liter of hot water from the steam tube/ hot water dispenser
Step 4: Confirm filter installation on the machine.
Press the MENU button
Press the Aroma strength/“√” button to confirm to enter the menu
Press the MENU/down button 4 times until “Water Filter” appears
Press the Aroma strength/ “√” button to select
The selection is set to ON, but it is not yet confirmed. Always confirm the selection ON by pressing the Aroma strength/“√” button
After confirming the display will first show a “V” symbol and then automatically switches to the start display including the filter symbol visible. This is an indication that the filter has been installed