New design from tip-to-tail to improve navigation in complex anatomy.
The embedded conductive ribbons eliminate the need for a hollow hypo tube therefore making a larger solid core possible similar to the design of a workhorse guide wire.
iFR is validated in the largest physiology clinical outcomes studies with data from over 4500 patients. 2,3
iFR is recognized by all three key cardiovascular societies. It is the only resting index with a class IA recommendation by the ESC, designated as “definitely beneficial” by SCAI, and included in both the ACC
AUC and NCDR.6-9
iFR is the leading hyperemia-free physiologic index for measuring pressure in diagnostic and interventional procedures. Only offered by Philips, iFR is an evidence-based methodology that improves outcomes, saves time, and reduces patient discomfort. 5,10,11
iFR Co-registration maps the physiologic measurements, directly onto the angiogram enabling more complete procedural guidance.
• Mapping of physiologic pressure drops onto the angiogram to better discern focal, serial or diffuse disease
• Precise lesion severity, location and length assessment
• Make length measurements without a cumbersome pull back device
• Physiologic impact of a virtual stent
Plan your procedure with physiologic guidance.
Indications for use:
The OmniWire pressure guide wire is indicated for use to measure pressure in blood vessels, including both coronary and peripheral vessels, during diagnostic angiography and/or any interventional procedures. It can also be used to facilitate the placement of catheters as well as other interventional devices in coronary and peripheral vessels. Blood pressure measurements provide hemodynamic information for the diagnosis and treatment of blood vessel disease. The device is indicated for patients undergoing diagnostic angiography and/or percutaneous interventions in the coronary and peripheral vessels. iFR has been FDA cleared for ischemia testing using proven dichotomous cut-point, 0.89.
Ordering information
Order number | Product name | Size | Tip shape | |
89185 | OmniWire pressure guide wire | 185 cm | Straight Tip | ![]() |
89185J | OmniWire pressure guide wire | 185 cm | J-Tip | ![]() |
#futureofIGT, #futureofCAD, #SolidCore #CoronaryIntervention
How would you improve interventional procedures?
What do you think about the new IntraSight platform?
Are we on the right track?
Connect with us via #futureofIGT / #OmniWire
Media contacts:
Fabienne van der Feer
fabienne.van.der.feer@philips.com
Phone: +31 622 698 001
Mark Groves
Phone: +31 631 639 916
1. Data on file.: D000410086_A, D000485394_A
2. Davies JE, et al., Use of the Instantaneous Wave-free Ratio or Fractional Flow Reserve in PCI. N Engl J Med. 2017 May 11;376(19):1824-1834.
3. Gotberg M, et al., iFR-SWEDEHEART Investigators. Instantaneous Wave-free Ratio versus Fractional Flow Reserve to Guide PCI. N Engl J Med. 2017 May 11;376(19):1813-1823.
4. Comparisons to Verrata Plus. Data/report internally on file or internal company’s data on file. Verification Report, D000410086/A
5. Patel M. “Cost-effectiveness of instantaneous wave-Free Ratio (iFR) compared with Fractional Flow Reserve (FFR) to guide coronary revascularization decisionmaking.” Late-breaking Clinical Trial presentation at ACC on March 10, 2018
6. Patel M, et al., ACC/AATS/AHA/ASE/ASNC/SCAI/SCCT/STS 2017 Appropriate Use Criteria for Coronary Revascularization in Patients with Stable Ischemic Heart Disease. J Am Coll Cardiol. 2017 May 2;69(17):2212-2241.
You are about to visit a Philips global content page
You are about to visit the Philips USA website.
You are about to visit a Philips global content page
You are about to visit the Philips USA website.