Health band Wrist-worn wearable device
This product is no longer available

Health band

Wrist-worn wearable device

This product is no longer available

Find similar products

Clinically relevant, objective, and continuous Cardiology, Respiratory, Sleep, and Energy Expenditure data collection for therapy evaluation across many medical conditions. DISCLAIMER The Philips Health band is not currently available in all geographies. Please check with your Philips representative or contact us for availability.

Specifications

Accessories
Accessories
Charger / user manual
  • Charging cradle with USB connector; 5 V DC and 250 mA
Battery
Battery
Battery type
  • 3.7 V 90 mAh built-in rechargeable li-polymer battery
Typical battery life
  • 3 days
Recharge time
  • 90 minutes to full charge
Communications
Communications
Bluetooth
  • Low energy Bluetooth
Communication range
  • Approximately 2 meters (6 feet)
Mobile devices
  • Tested on devices from leading mobile manufacturers
Dimensions
Dimensions
Size
  • Approx. 200mm x 24mm (small); Approx. 230mm x 24mm (large) Enclosure Height: 11mm; Strap Height: 3mm
Weight
  • Approx. 25 g / 0.9 oz
Display
Display
Display
  • Monochrome matrix display
Environmental attributes
Environmental attributes
Moisture protection rating
  • IPX5/IPX7 (Health band); IP21 (charging cradle)
Storage/transportation
  • Temp -20 °C / -4 °F to 60 °C / 140 °F; Relative humidity: < 93% Atmos pressure:700hPa to 1060hPa
Memory
Memory
Memory size
  • 4 MB
Monitoring capacity
  • 7 days before rewriting
Recording
Recording
Data output
  • 60-second epoch; 30-second epoch for sleep/wake; aggregated per period
Off-wrist detection
  • Through pulse rate detected via photopletysmography (PPG)
Recording time
  • Continuous recording excluding charging time and off wrist periods
Sensors (Accelerometer and PPG)
Sensors (Accelerometer and PPG)
Accelerometer dynamic range
  • +/- 8g
Accelerometer sampling rate
  • 16 Hz
Accelerometer RMS noise
  • <2.1 mg
PPG frequency
  • 525 nm for both LEDs
PPG sampling rate
  • 32 Hz
PPG sensor
  • Optical Heart rate sensor (2 LEDs equally distributed on a single axis, centers aligned)
Accelerometer
  • MEMS 3 axis (x,y,z)
Accessories
Accessories
Charger / user manual
  • Charging cradle with USB connector; 5 V DC and 250 mA
Battery
Battery
Battery type
  • 3.7 V 90 mAh built-in rechargeable li-polymer battery
Typical battery life
  • 3 days
See all specifications
Accessories
Accessories
Charger / user manual
  • Charging cradle with USB connector; 5 V DC and 250 mA
Battery
Battery
Battery type
  • 3.7 V 90 mAh built-in rechargeable li-polymer battery
Typical battery life
  • 3 days
Recharge time
  • 90 minutes to full charge
Communications
Communications
Bluetooth
  • Low energy Bluetooth
Communication range
  • Approximately 2 meters (6 feet)
Mobile devices
  • Tested on devices from leading mobile manufacturers
Dimensions
Dimensions
Size
  • Approx. 200mm x 24mm (small); Approx. 230mm x 24mm (large) Enclosure Height: 11mm; Strap Height: 3mm
Weight
  • Approx. 25 g / 0.9 oz
Display
Display
Display
  • Monochrome matrix display
Environmental attributes
Environmental attributes
Moisture protection rating
  • IPX5/IPX7 (Health band); IP21 (charging cradle)
Storage/transportation
  • Temp -20 °C / -4 °F to 60 °C / 140 °F; Relative humidity: < 93% Atmos pressure:700hPa to 1060hPa
Memory
Memory
Memory size
  • 4 MB
Monitoring capacity
  • 7 days before rewriting
Recording
Recording
Data output
  • 60-second epoch; 30-second epoch for sleep/wake; aggregated per period
Off-wrist detection
  • Through pulse rate detected via photopletysmography (PPG)
Recording time
  • Continuous recording excluding charging time and off wrist periods
Sensors (Accelerometer and PPG)
Sensors (Accelerometer and PPG)
Accelerometer dynamic range
  • +/- 8g
Accelerometer sampling rate
  • 16 Hz
Accelerometer RMS noise
  • <2.1 mg
PPG frequency
  • 525 nm for both LEDs
PPG sampling rate
  • 32 Hz
PPG sensor
  • Optical Heart rate sensor (2 LEDs equally distributed on a single axis, centers aligned)
Accelerometer
  • MEMS 3 axis (x,y,z)

You are about to visit a Philips global content page

Continue

Our site can best be viewed with the latest version of Microsoft Edge, Google Chrome or Firefox.