Reusable adult SpO₂ glove sensor with mid-point connector
Pulse oximetry supplies
HCM1191TSupplies
  • With the mid-point connector, you can switch among bedside, transport and mobile patient monitors without creating an unmanageable cable length.
  • The M1191BL sensor fits snugly on the finger. It exerts minimal pressure to avoid skin irritation.
  • Standard product photograph

Reusable adult SpO₂ glove sensor with mid-point connector

Pulse oximetry supplies
HCM1191TSupplies
The Philips M1191T SpO₂ glove sensor features a mid-point connector for efficient transfer from a bedside to a transport or mobile patient monitor. It is designed for use on the fingers of adults greater than 50 kg (110 lbs). This durable, comfortable sensor is manufactured without latex and supports cost-effective oxygen saturation measurement.

Features
Made to last
The M1191T sensor is extremely durable, and may be used many times during its long lifespan. The medical grade silicone can be easily cleaned with widely-available disinfectant solutions
Mid-point connector
The M1191T sensor’s mid-point connector makes it easy and efficient to continue using the sensor as patients move among bedside, transport, and mobile monitors. Simply disconnect the monitor at the T-connector and change monitors without creating a long, unmanageable cable length.
Committed to you
From sensor selection to ordering and training, we’re committed to providing you with excellent support. Check out our website or contact your local representative to learn more about the advantages of working with Philips.
Specifications
  • SpO2 Sensor
    Patient Application
    Adult
    Application Site
    Finger
    Adapter Cable Compatibility
    M1943A; M1943AL
    Recommended Patient Weight
    >50 kg (>110lb)
    Cable Length
    45 cm (17.7'')
  • SpO₂ sensor
    Cable length
    45 cm (17.7'')
  • Product details
    Cable Length
    45 cm (17.7'')
  • Product details
    Use with Non-Philips Healthcare Equipment
    No
    Use with Philips Healthcare Equipment
    862108, 862231, 862439, 862474, 862478, 863063, 863064, 863065, 863066, 863068, 863071, 863072, 863073, 863074, 863077, 863080, 863081, 863085, 863086, 863087, 863088, 863264, 863265, 863266, 863276, 863278, M1020A, M1020B, M1350B, M1350C, M2600A, M2703A, M2705A, M3000A, M3001A, M3002A, M3535A, M3536A, M3536J, M3536M, M4735A, M4739A, M8102A, M8105A, M8105AT, M8105AS
    Product Category
    SpO2
    Product Type
    Sensor
    CE Certified
    Yes
    Single-Patient Use OR Multi-Patient Use
    Multi-Patient Use
    Package Weight
    .100
    Not manufactured with natural rubber latex
    Yes
    Packaging Unit
    1 sensor
    Sterile OR Non-Sterile
    Non-Sterile
    Minimum Shelf Life
    None
    Use with Other Supplies
    M1943A, M1943AL, M4787A

Documentation

SpO₂ sensors that last
PDF|649.95 KB
Reusable sensors that last
PDF|831.63 KB
Studies of new generation Pulse Oximetry technologies
PDF|240.80 KB
Product Brochure
PDF|1.86 MB

Related products

  • Reusable, adult SpO₂ clip sensor Pulse oximetry supplies
    Reusable, adult SpO₂ clip sensor
    The reusable Philips M1196T adult clip sensor effectively measures pulse oximetry on adults and children weighing more than 40 kg (88 lbs). It is manufactured without latex. This sensor features a 90 cm (35.4 in) cable length and connects to 12-pin devices via M1900B adapter cable and connects to 8-pin devices via M1943A or M1943AL adapter cables and can be used with M4787A extension cable or validated 9-pin devices.
  • Multi-patient, 8-pin to 9-pin D-sub adapter cable, 1.1 m (3.6 ft) Pulse oximetry supplies
    Multi-patient, 8-pin to 9-pin D-sub adapter cable, 1.1 m (3.6 ft)
    Designed for use with Philips SpO₂ monitors and sensors, the M1943A 8-pin adapter cable is 1.1 m (3.6 ft) in length and features a D-sub connector. It adapts 9-pin sensors to 8-pin sockets. It can be used with these sensors: M1131A, M1132A, M1133A, M1134A, M1140A, M1191T, M1192T, M1193T and M1196T.
  • Multi-patient, 8-pin to 9-pin D-sub adapter cable, 3 m (9.8 ft) Pulse oximetry supplies
    Multi-patient, 8-pin to 9-pin D-sub adapter cable, 3 m (9.8 ft)
    Designed for use with Philips SpO₂ monitors and sensors, the M1943AL adapter cable is 3 m (9.8 ft) in length and features a D-sub connector. It adapts 9-pin sensors to 8-pin sockets. It can be used with these sensors: M1131A, M1132A, M1133A, M1134A, M1140A, M1191T, M1192T, M1193T and M1196T.
Disclaimer
Product may not be available in all geographies, please check with your Philips representative for complete portfolio availability.