Multi-patient, 8-pin to 9-pin D-sub adapter cable, 3 m (9.8 ft)
Pulse oximetry supplies
Supplies
  • With the mid-point connector, you can switch among bedside, transport and mobile patient monitors without creating an unmanageable cable length.
  • Standard product photograph

Multi-patient, 8-pin to 9-pin D-sub adapter cable, 3 m (9.8 ft)

Pulse oximetry supplies
Supplies
Designed for use with Nellcor OxiMax™ SpO₂ sensors, the M1943NL adapter cable is 3 m (9.8 ft) in length and features a D-sub connector. It adapts 9-pin sensors to 8-pin sockets.

Features
Adapts 9-pin sensors to 8-pin sockets
Use the M1943NL cable whenever you need to adapt an OxiMax™ 9-pin sensor to an 8-pin socket.
Long cable length
3 m (9.8 ft) cable length. The long cable adapts to a variety of room configurations
Specifications
  • SpO2 Adapter Cable
    Cable Length
    3.0 m (9.8')
    Number of Pins
    8-Pin
    Sensor Compatibility
    Nellcor
  • Product details
    Use with Non-Philips Healthcare Equipment
    No
    Product Category
    SpO2
    Use with Philips Healthcare Equipment
    M1020B/A02, M3001A/A02, M3002A/A04, M8102A/A04, M8105AS/SP2
    Product Type
    Adapter Cable
    CE Certified
    Yes
    Single-Patient Use OR Multi-Patient Use
    Multi-Patient Use
    Package Weight
    .300
    Not manufactured with natural rubber latex
    Yes
    Packaging Unit
    1 cable
    Sterile OR Non-Sterile
    Non-Sterile
    Minimum Shelf Life
    None

Documentation

SpO₂ sensors that last
PDF|649.95 KB
Studies of new generation Pulse Oximetry technologies
PDF|240.80 KB
Understanding pulse oximetry
PDF|3.24 MB

Related products

  • Multi-patient, 8-pin to 9-pin D-sub adapter cable, 1.1 m (3.6 ft) Pulse oximetry supplies
    Multi-patient, 8-pin to 9-pin D-sub adapter cable, 1.1 m (3.6 ft)
    Designed for use with Philips SpO₂ monitors and sensors, the M1943A 8-pin adapter cable is 1.1 m (3.6 ft) in length and features a D-sub connector. It adapts 9-pin sensors to 8-pin sockets. It can be used with these sensors: M1131A, M1132A, M1133A, M1134A, M1140A, M1191T, M1192T, M1193T and M1196T.
  • Multi-patient, 8-pin to 9-pin D-sub adapter cable, 3 m (9.8 ft) Pulse oximetry supplies
    Multi-patient, 8-pin to 9-pin D-sub adapter cable, 3 m (9.8 ft)
    Designed for use with Philips SpO₂ monitors and sensors, the M1943AL adapter cable is 3 m (9.8 ft) in length and features a D-sub connector. It adapts 9-pin sensors to 8-pin sockets. It can be used with these sensors: M1131A, M1132A, M1133A, M1134A, M1140A, M1191T, M1192T, M1193T and M1196T.
Disclaimer
Product may not be available in all geographies, please check with your Philips representative for complete portfolio availability.