How to create Bi-Directional Dubbing from my recorder?
Your Philips DVD recorder allows you to copy content from a DVD to a cassette tape or vice versa. This function is available only if the content is not copy-protected.
Press SETUP and use Up and Down arrows to select General Setting, then press OK
Use Up and Down arrows to select Recording, then press OK
Use Up and Down arrows to select Dubbing Mode, then press OK
Use Up and down arrows to select VCR > DVD, then press OK
Press VCR, then press PLAY to find the point where you wish to start dubbing
Press PAUSE when you come to the desired start point
Press DVD, then press REC MODE repeatedly to select the desired recording mode
Press DIRECT DUBBING
Press STOP to stop the dubbing
After starting VCR to DVD duplication, the picture may be distorted because of the auto tracking function. This is not a malfunction. Be advised to play back the tape until the picture is stabilized, then set the starting point which you wish to start recording, and start VCR to DVD duplication.
This unit will automatically stop the duplication if playback with no image is detected for more than 3 minutes during VCR to DVD duplication
Playback sound mode of the dubbed contents is determined by the playback sound mode of the VCR at the point of dubbing
This function is available for audio CD, but not with MP3, Windows Media™ Audio or DivX® files
Use Up and Down arrows to select DVD > VCR, then press OK
Press DVD, then press PLAY to find the point where you wish to start dubbing
Press PAUSE when you come to the desired start point
Press VCR, then press REC MODE repeatedly to select the desired recording mode. Rewind or fast forward the tape to the point where you want to start recording.
Press DIRECT DUBBING
Press STOP to stop the dubbing
The information on this page applies to the following models:DVDR3545V/F7 , DVDR3545V/37 .