Keep your shaving & grooming device performing like new with razor replacement parts

Get back to maximum performance!

With the right care and cleaning, our shaving & grooming devices will continue to perform day after day.

Search for your product to see all compatible replacement parts and accessories.

Search by product number.

Sorry, we did not find any parts or accessories for this product.

Please check if you filled in the correct model number. The model number consists out of letters followed by numbers (e.g. Shaver 9300, S9311/84).

In case the model number does not offer any results, we would like to advise you to reach out to our contact center.

Search results for {words} ({number} products)

We found {number} products that are available outside your country, so local promotions may not apply.

Show products Hide products

We found more than 1 product.

Please choose your model based on the last 2 digits of your product number, for example RQ1280/21.

Sort options

Modelnumber (ascending)

Modelnumber (descending)

Production year (ascending)

Production year (descending)

Product image

Product description

Model number

Back to all products

You can find the model number printed on the back of your product:

Shaving

Replacement heads
Replacement heads
How to replace your shaver heads

With regular use, your shaver heads will cut nearly 5 million hairs per year! To maintain top performance, we recommend you replace the shaver heads every year. Here’s how.

Series 9000

1. Open and/or detach the head unit.
2. Twist to unlock retaining rings and remove old shaving heads.
3. Insert Philips replacement shaver heads.

4. Lock retaining rings.
5. Close and/or attach the head unit.

Series 7000

1. Open and/or detach the head unit.
2. Twist to unlock retaining rings and remove old shaving heads.
3. Insert Philips replacement shaver heads.

4. Lock retaining rings.
5. Close and/or attach the head unit.

Series 5000

1. Open and/or detach the head unit.
2. Twist to unlock retaining rings and remove old shaving heads.
3. Insert Philips replacement shaver heads.

4. Lock retaining rings.
5. Close and/or attach the head unit.

Shaver heads

Norelco Shaver series 9000 Shaving heads

SH90/62

V-Track Precision Blades PRO

Fits S9000 (S9xxx)

Fits Star Wars Shaver SW97xx

Fits Star Wars Shaver SW67xx

$59.95*

View product

Norelco Shaver series 7000 Shaving heads

SH70/52

GentlePresicion blades

Fits S7000 (S7xxx)

Fits Star Wars Shaver SW77xx

$49.99*

View product

Norelco Shaver series 5000 Shaving heads

SH50/52

MultiPrecision Blades

Fits S5000 (S5xxx)

Fits AquaTouch (S5xxx)

Fits S6000 (S6XXX)

$34.99*

View product

Don't own a Series 9000, 7000 or 5000?

View all shaver heads

FAQs

When do I need to replace the shaving heads?

The latest Philips shavers have an built-in replacement reminder in the form of a shaving unit symbol. This symbol will light up and indicate you when to replace shaving heads.

If you own a shaver which doesn't come with the built-in replacement reminder we recommend you to replace your Philips shaving heads every year for optimal shaving results.

How do I replace the shaving heads?

Open and/or detach the head unit.

Twist to unlock retaining rings and remove old shaving heads.

Insert Philips replacement shaver heads.

Lock retaining rings.

Close and/or attach the head unit.

How do I reset the shaving heads replacement reminder?

After replacing shaving heads, you can reset the replacement reminder by pressing the on/off button for more than 7 seconds. Otherwise, replacement trigger will turn off automatically after 9 successive shaves.
Cleaning your shaver
Cleaning your shaver
How to clean your shaver

Philips offers different cleaning methods to keep your shaver in top condition at all times.

For shavers with SmartClean

SmartClean cartridges should be replaced every 3 months.

1. Press the top cap to open the SmartClean
System.
2. Shake off any excess water from shaver
before placing in the SmartClean System.
3. Hold the shaver head side down above the
shaver holder.
4. Place the shaver into the holder, push
shaver back and press down the top
cap to connect the shaver (click).
5. Press the ON/OFF button on the
SmartClean System to start the cleaning
cycle.

For shavers with JetClean

We recommend cleaning regularly with our JetClean solution.

1. Rinse the shaver briefly under the hot tap.
2. Place the shaver (without the protection cap) in the holder.
3. Press the on/off button on the Jet Clean System to start the cleaning program.

For other shavers

We recommend using our shaving head cleaning spray.

1. Turn the shaver on.

2. Rinse the shaving unit under a hot tap.

3. Turn the shaver off.

4. Open the shaving unit.

5. Rinse the inside of the shaving unit and hair chamber under a hot tap for 30 seconds.

6. Reassemble the shaving unit and carefully shake off excess water. Let the shaving unit dry completely.

Cleaning products

Norelco Cleaning cartridge

JC302/52

2-pack

Cleans

Lubricates

Refreshes

Overall rating 4.1/ 5

(9)

$11.99*

View product

Norelco Jet clean solution

HQ200/52

With Cool Breeze scent

Overall rating 4.4/ 5

(27)

$4.95*

View product

FAQs

How do I know if my Philips shaver is waterproof?

This will be indicated on the back of your Philips shaver, depending on your specific model.

If a tap symbol is printed on the back of the shaver:

Your shaver is washable. This means that you can rinse your shaver under the tap according to the instructions in the user manual. You cannot use the shaver in the bath or shower, however.

If a bath symbol is printed on the back of the shaver:

Your shaver can be safely used in the bath or shower.

If there is no symbol at all on the back of your shaver OR if a crossed-out tap symbol is printed on the back of your shaver:

The appliance cannot be used in the bath or shower and cannot be rinsed under the tap. You must keep the shaver away from water.

How do I clean my shaver?

Cleaning station:

1. Press the top cap to open the SmartClean System.
2. Shake off any excess water from shaver before placing in the SmartClean System.
3. Hold the shaver head side down above the shaver holder.
4. Place the shaver into the holder, push shaver back and press down the top cap to connect the shaver (click).
5. Press the ON/OFF button on the SmartClean System to start the cleaning cycle.

Cleaning spray:

Turn the shaver on.

Rinse the shaving unit under a hot tap.

Turn the shaver off.

Open the shaving unit.

Rinse the inside of the shaving unit and hair chamber under a hot tap for 30 seconds.

Reassemble the shaving unit and carefully shake off excess water. Let the shaving unit dry completely.

How often should I use the cleaning station?

We advise you to use the SmartClean system at least once a week.

When do I need to replace the SmartClean cartridge?

Replace the cleaning cartridge when the replacement symbol flashes orange or when you are no longer satisfied with the result. We also recommend to replace the cartridge at least every three months for hygiene reasons.
SmartClick accessories
SmartClick accessories
Expand your possibilities with SmartClick

Our SmartClick accessories instantly turn your shaver into a beard styler, nose-and-ear trimmer, or cleansing brush. One click is all it takes.

SmartClick accessories are compatible for all Series 5000, 7000 and 9000 shavers

How to use SmartClick accessories

The Philips exclusive SmartClick-enabled shavers allow you to turn your shaver into a beard styler, nose trimmer, or cleansing device. Available for all 5000, 7000, and 9000 series shavers. Improve your morning rituals and be the best you.

SmartClick products

Norelco SmartClick Beard Styler

RQ111/52

SmartClick accessory

5 length settings

Overall rating 2.5/ 5

(28)

$39.95*

View product

FAQs

How do I attach my SmartClick accessory to my device?

Easy click on, click off. Simply click the SmartClick attachment onto your Philips compatible shaver.

Grooming

Body grooming
Body grooming
Keep in top shape

To keep your Philips Norelo Bodygroom at top performance, we recommend you replace the shaving foil every 12 months.

Bodygroomer products

Norelco Replacement shaving foil head

BG2000/40

Overall rating 3.2/ 5

(15)

$14.99*

View product

FAQs

When do I need to replace the foil?

Change foil every 12 months for best results.

How do I replace the foil?

Always switch the device OFF and remove the device from the charging stand before replacing the foil.

Remove the foil head by pulling it off the groomer.

Place the new foil head on the Groomer by snapping it into place. You will hear a "click".

After replacing the shaving foil head, check that the shaving head is firmly attached before using the Groomer.

When do I need to clean my groomer?

The groomer should be cleaned after each use.

How do I clean my groomer?

Always switch Groomer OFF, remove the power cord from outlet and charging stand before cleaning.

Remove the foil by pulling it off the appliance.

Rinse the foil under warm running tap water to rinse away debris.

Clean the hair chamber with the cleaning brush. You may also rinse the hair chamber under warm running tap water to remove any residual debris.

Do not use a towel or cloth to dry shaving foil or cutters as this may cause damage; allow to air dry thoroughly.

Reattach the shaving head by snapping it back onto the Groomer. You will hear a "click".

Rinse the Groomer body under running warm tap water. Wipe dry with a soft clean towel or cloth.

Can my groomer be rinsed under the tap?

Yes, you can rinse your Philips groomer under the tap.

OneBlade

Find OneBlade parts ›

Keep your shaving & grooming device performing like new with razor replacement parts

Get back to maximum performance!

Search by product number.

Product image

Product description

Model number

Shaving

How to replace your shaver heads

Series 9000

Series 7000

Series 5000

Shaver heads

Norelco Shaver series 9000 Shaving heads

Norelco Shaver series 7000 Shaving heads

Norelco Shaver series 5000 Shaving heads

Don't own a Series 9000, 7000 or 5000?

FAQs

How to clean your shaver

For shavers with SmartClean

For shavers with JetClean

For other shavers

Cleaning products

Norelco Cleaning cartridge

Norelco Jet clean solution

FAQs

If a tap symbol is printed on the back of the shaver:

If a bath symbol is printed on the back of the shaver:

If there is no symbol at all on the back of your shaver OR if a crossed-out tap symbol is printed on the back of your shaver:

Expand your possibilities with SmartClick

How to use SmartClick accessories

SmartClick products

Norelco SmartClick Beard Styler

FAQs

Easy click on, click off. Simply click the SmartClick attachment onto your Philips compatible shaver.

Grooming

Keep in top shape

Bodygroomer products

Norelco Replacement shaving foil head

FAQs

OneBlade

Subscribe to our newsletter

Payment

Quick links