The latest software solves the issues below:
- TV turns OFF and ON by itself randomly when viewing TV and AV channels.
- No picture, no sound & no back light but LED is turned ON when the TV wake up from standby mode.
- Translation errors in Spanish and France TV menu.
- Rephrase the help texts for the Retail and Home mode in the TV menu.
- Digital Natural Motion feature is turned ON but it shows OFF in the TV menu.
- No picture, no sound & no back light but LED is turned ON when the TV wake up from standby mode.
- Picture expanded vertically in digital channel.
- Incorrect clock information update.
- Jiggled image with the SD signal source (480i/480p) in AV1, AV2 and PC mode.
- No video after Play Station 2 console system reset.
- Picture expanded vertically with the HDMI source, 1080p 60Hz, 16:9 widescreen format.
- Picture a little bit blur (Scaling artifacts) in PC mode, 1080p 60Hz input.
- Picture format changing too frequently during movie playback
- Intermittent picture flicker on white background at high contrast level. (Only applicable for 52” models)
- Intermittent picture lost when poor video signal is connected through AV1 or AV2 inputs.
- TV menu shifted horizontally to the right when viewing PAL “50Hz” signal from either the AV source or Off-air transmission. (Only applicable for 42” & 47” models).
- Picture and TV menu shifted horizontally to the right when viewing PAL “50Hz” signal from either the AV source or Off-air transmission. (Only applicable for 52” models).
- Faint image is still visible for a few seconds after TV is turn off.
- Improvement on motion picture judder when “Digital Natural Motion” menu is turned ON.
- Improvement on start-up problem.
- Solved system hang when MPEG header information is not present.
- Solved audio profile setting problem.
- Performance improvement on motion judder related to film mode content.
- Solved digital channel lost problem.
- Solved AVL not working issue.
- Solved automatic clock not working issue.
- Solved occasional software upgrade failure via USB.
- Solved color space error for PC/HDTV modes with 720p 60Hz input.
- Solved child lock after bug when used with Automatic clock.
- Solved remote control lockup due to HDMI CEC address discovery.
- Performance improvement on motion judder related to film mode content.
- Solved plop sound during channel changing with set top box.
- Solved set does not output Dolby digital stream on SPDIF OUT.
- Solved headphone volume goes to maximum when changing delta volume.
- Implementation of Automatic Format Detection (AFD).
- Correction of non-linear stretching for “Automatic” on 4:3 sources.
- Solved channel map erased issue.
How to check the current software version on my TV set?
- Press 'MENU' button on remote control to access the TV menu.
- Press the cursor down to select INSTALLATION and press the cursor right.
- Select CURRENT SOFTWARE INFO to display the current software version on your TV set.
- If the TV software version is lower than the version posted on the website means your TV set needs to be upgraded.
- Follow the instruction in the user manual or Firmware Upgrade Readme file on how to upgrade your software.
Where can I find the latest software for my TV set?
The Firmware Upgrade Software and Readme File documents can be found on the Philips support website. Refer to the SOFTWARE section.
