Emergency Care & Resuscitation

HeartStart FR3

Defibrillator

Product number:

861388

The HeartStart FR3 is Philips best professional-grade AED with advanced features for the professional responder. The FR3 reduces deployment time by eliminating steps and helps you start the right therapy on your patient faster.

The HeartStart FR3 is Philips best professional-grade AED with advanced features for the professional responder. The FR3 reduces deployment time by eliminating steps and helps you start the right therapy on your patient faster.

For a U.S sales representative please call 1-800-225-0230. For non-US purchasing, training, support and more click the button to contact us.
*
*
*
*
*
*
*
*
*
*
*
*
*

* Required fields
Need more information?

Features

CPR Quality

  • Quick shock reduces the time between hands-off and shock delivery
  • Optional Q-CPR measurement and feedback for guidelines compliant CPR
 
Case
  • Small, light, and easy-to-maneuver in tight places
  • Tested to military standards and is US Army Airworthiness Release (AWR) certified
Pads
  • Pre-connected pads with no pouch to open
  • Easily hands off to Philips MRx defibrillator-monitor
  • Pads can be used on adults and children
  • Infant/Child Key automatically adjusts therapy for infant/child protocols
 
Software
  • Integrates with Philips data management software solutions
 
Battery
  • Delivers 300 shocks or 10 hours (with QCPR) of monitoring if configured

Specifications Show all

Physical Dimensions
Size with external paddles
12.4" (W) x 7.7" (D) x 13.4" (H) (313 mm x 195 mm x 340 mm) "/mm
Weight
13.2 lbs. (6 kg): base unit with 1 battery/pads and pads cable.
13 lbs. (5.9 kg) with optional 75 mm strip chart printer.
Paddle tray and external standard paddles add less than 2.5 lbs. (1.1 kg).
Carrying case adds 4.1 lbs. (1.86 kg). lbs/kg
Defibrillation
Waveform
Truncated Exponential Biphasic.Waveform parameters adjusted as a function of patient impedance.
Output Energy
Manual (selected): 1-10/15/20/30/50/70/100/120/150/170/200 Joules into a 50 Ohm load
AED Mode (single energy output): 150 Joules into a 50 ohm load. Joules/Ohm
Charge Time
Less than 5 seconds to 200 Joules with a new/ fully charged lithium ion battery at 25º C
Shock Delivery
Via multifunction defib electrode pads or paddles
Shock-to-Shock Cycle Time
Typically less than 20 seconds seconds
Minimum Patient Impedance Range
15 Ohm (internal defibrillation); 25 Ohm (external defibrillation) Ohm
Maximum Patient Impedance Range
180 Ohm Ohm
AED Mode
Shock advisory sensitivity and specificity meet AAMI DF-39 guidelines
Physical dimensions Defibrillator model HeartStart MRx (M3536A)
Size without external paddles
12.4" (W) x 7.7" (D) x 11.7" (H) (313 mm x 195 mm x 295 mm) "/mm
CPR feedback and measurement
Compression Depth
Target: -1.50 to -2.00" (-38 to -51 mm) "/mm
Compression Rate
Target: 90 to 120 cpm cpm
Ventilation Volume
Graphic indicator: empty/one-third full/two-thirds full/full
Ventilation Rate(a)
Target for breaths delivered before 60 seconds since last compression: 6 to 16 vpm seconds/vpm
Ventilation Rate(b)
Target for breaths delivered beyond 60 seconds since last compression: 9 to 16 vpm seconds/vpm
SpO2 pulse oximetry
Range
0 to 100% %
Resolution
0,01%
Alarm Range(a)
Low Limit: 50 to 99% (Adult/Pediatric) %
Alarm Range(b)
High Limit: 51 to 100% (Adult/Pediatric) %
Alarm Delay
10 seconds
ECG and arrhythmia monitoring
Input
Up to 4 ECG waves displayed and up to 3 ECG waves print simultaneously.
Leads
Lead I, II, or III obtained through 3-lead ECG cable and separate monitoring electrodes.
With 5-lead cable, obtain leads I/II/III/aVR/aVL/ aVF or V.
Pads ECG obtained through 2 multifunction defibrillation electrode pads.
Lead Fault
‘Lead Off ’ message and dashed line displayed if an electrode or lead wire becomes disconnected.
Pads Fault
Dashed line displayed if a pad becomes disconnected.
Heart Rate Display
Digital readout on display 15 to 300 bpm with accuracy ±10% bpm/%
Heart Rate/Arrhythmia Alarms
HR/Asystole/VFIB/VTACH/VTACH/extreme tachycardia/extreme bradycardia/PVC rate.
ECG Size
2.5/5/10/20/40 mm/mV autogain mm/mV
Noninvasive Blood Pressure
Waveform
Monophasic Truncated Exponential
Pressure Range(a)
Systolic: 40 to 260 mmHg mmHg
Current Pulse Amplitude
10 mA to 160 mA (5 mA resolution); accuracy 10 mA to 50 mA ± 5 mA, 50 mA - 160 m A ± 10% mA
Pressure Range(b)
Diastolic: 20 to 200 mmHg mmHg
Initial Pressure
Adult: 160 mmHg and Pediatric: 120 mmHg mmHg
Maximum Pressure
280 mmHg mmHg
Alarm Range(d)
Systolic high limit: 30 - 270 (Adult) and 35 - 180 (Pediatric)
Modes
Demand or Fixed Rate
Refractory Period
340 msec (30 to 80 ppm); 240 msec (90 to 180 ppm) msec/ppm
Alarm Range(e)
Systolic low limit: 30 - 265 (Adult) and 30 - 175 (Pediatric)
Alarm Range(f)
Diastolic high limit: 18 - 240 (Adult) and 18 - 150 (Pediatric)
Alarm Range(g)
Diastolic low limit: 10 - 240 (Adult) and 10 - 145 (Pediatric)
Physical
Size
2.7" high x 5.3" wide x 8.7" deep (6.9 cm x 13.5 cm x 22.1 cm)
Weight
3 lbs 8 oz (1.6 kg) with FR3 standard battery installed
Environmental & physical requirements
Solids/Water resistance
IP24
Operating temperature
0º - 45º C (32º - 113º F) ° C/° F
Storage temperature
-20 - 70º C (-4º - 158º F) ° C/° F
Operating humidity
0% to 95% relative %
Operating altitude
0 to 15000 ft (0 to 4500 m) ft/m
Storage altitude
0 to 15000 ft (0 to 4500 m) ft/m
Mechanical shock
Bump: IEC 68-2-29
Freefall: IEC 68-2-32
Operating vibration
MIL STD 810E 514.4 Category 6 Helicopter
General storage vibration
UH60 Non-Operating: IEC 68-2-6 Swept Sine Vibration and IEC 68-2-64 Random Vibration
Safety
Meets EN 60601-1, UL 2601-1/CSA C22.2 No. 601-1
Strip Chart Recorder
Recorder(a)
Standard: 50 mm (paper width) thermal array printer mm
Recorder(b)
Optional: 75 mm (paper width) thermal array printer mm
Continuous ECG Strip
Prints primary ECG lead with event annotations and measurements in real-time or with 10-second delay
Auto Printing
Recorder can be configured to print marked events/charge/ shock and alarms
Reports
Event Summary, 12-Lead/Operational Check/ Configuration/Status Log and Device Information
Paper Size
1.97” (50 mm) W by 100 ft. (30 m) L and 2.95” (75 mm) W by 100 ft. (30 m) L "/ft/mm/m
Battery
Type
6.3 Ah, 14.8 V, rechargeable lithium ion Ah/V
Dimensions
6.5" (H) x 3.8" (W) x 1.6" (D) (165 mm x 95 mm x 42 mm) "/mm
Weight
1.6 lb. (0.73 kg) lb/kg
Charge Time
Approximately 3 hours from fully depleted to 100%. 90 minutes from fully depleted to 80% hours/%
Capacity(a)
At least 5 hours of continuous 12-lead ECG/SpO2 and CO2 monitoring.
With NBP every 15 minutes on one new fully charged battery. hours
Capacity(b)
At least 3.5 hours of continuous 12-lead ECG/SpO2 and CO2 monitoring.
With NBP every 15 minutes and pacing at 180 ppm at 160 mA on one new fully charged battery. hours
Environmental
Sealing
Meets IEC529 class IP55 with battery installed
Temperature
Operating/standby: 32°–122°F (0°– 50°C)
Altitude
0 –15,000 feet (0 –4,572 meters)
Shock/drop
Meets MIL-STD-810F 516.4, Procedure IV
Vibration
Meets MIL-STD-810F 514.5 C-17
Patient Impedance Range
Minimum: 15 ohm (internal defibrillation); 25 ohm (external defibrillation) Maximum: 180 ohm
Display
Dimensions
8.4" diagonal (128 mm x 171 mm) "/mm
Type
TFT color LCD
Resolution
480 x 640 pixels (VGA) VGA
Wave Viewing Time
5 seconds (ECG) seconds
12-Lead ECG
Input
12-Lead cable: leads I/II/III/aVR/aVL/ aVF and V/C1-V/C6
Display View
All 12-lead ECG waves display simultaneously
Strip Recorder
All 12-leads print on the strip chart printer in 3x4 format
Transmission
CompactFlash data card; Bluetooth® dial-up Internet connection, Bluetooth® FTP
End-tidal CO2
Range
0 to 99 mmHg mmHg
Resolution
1 mmHg (0.1 kPa) mmHg/kPa
Sample Size
50 ml per minute ml
Alarm Range(h)
Low Limit: 10 to 95 mmHg (Adult/Pediatric) mmHg
Alarm Range(i)
High Limit: 20 to 100 mmHg (Adult/Pediatric) mmHg
Data storage
Internal
12 hours of continuous ECG waveforms and events. Plus 50 12-lead ECG reports
Data Card
12 hours of continuous ECG waveforms and events.
Plus 50 12-lead ECG reports on a CompactFlash memory card
ECG display
Screen
LCD color display, 320 x 240 pixels. 2.8" x 2.1" (7.2 cm x 5.4 cm)
Bandwidth
1 Hz to 30 Hz (-3dB), nominal (non-diagnostic)
Monitored Lead
Lead II using anterior-anterior adult pads placement
Environmental
Shock/drop
Meets MIL-STD-810F 516.4, Procedure IV
Patient Impedance Range
"Minimum: 15 ohm (internal defibrillation); 25 ohm (external defibrillation) Maximum: 180 ohm"
Vibration
Meets MIL-STD-810F 514.5 C-17
Abuse tolerance
After a ibe-meter drop to any edge, corner, or surface in standby mode
AED Mode
Shock advisory sensitivity and specificity meet AAMI DF-39 guidelines

Supplies list

 

Supplies for your Philips EMS equipment are as rugged, reliable and affordable as the devices themselves. Below, find the key supplies you need for your HeartStartMRx monitor/defibrillator. Some are available on our eStore and all may be ordered by phone.

 

View a complete list of supplies for our EMS products

 

Product number

 

Supply name

 

Description

 

Category

 

989803150081

 

FR3 Bluetooth Transceiver Module

 

Data management

 

989803150061

 

FR3 Data Card

HeartStart FR3 Text Bundle

 

Data management

 

989803179181

 

FR3 Small Case, Soft

 

Fits AED and extra set of SMART Pads III.

 

Cases

 

989803150161

 

FR3 Primary Battery

 

Accessories

 

861388

 

HeartStart FR3 Text Bundle

 

Includes standard battery, SMART Pads III, and user documentation

 

AED bundles

 

861389

 

HeartStart FR3 ECG Bundle

 

Includes standard battery, SMART Pads III, and user documentation

 

AED bundles

 

989803149981

 

SMART Pads III, 1 set

 

Accessories

 

989803149991

 

SMART Pads III, 5 sets

 

Accessories

 

989803150011

 

Replacement part for Pads Sentry Insert in FR3 Case

 

Accessories

 

989803150111

 

FR3 Fast Response Kit

 

Use only with Rigid System Case, Kits contents same as 68-PCHAT

 

Accessories

 

989803150031

 

FR3 Infant/Child Key

 

Accessories

 

9898031502111

 

Bottom Case Insert for FR3 System Case, Rigid

 

Replacement part for Bottom Case Insert in FR3 Rigid System Case

 

Accessories

 

989803149971

 

FR3 System Case, Rigid

 

Fits AED, extra battery, extra set of SMART Pads III, FR3 Fast Response Kit. All HeartStart FR3 cases are compatible with HeartStart Cabinets and Wall Mounts.

 

Cases


989803179161

 

 

FR3 System Case, Soft

 

Fits AED, extra battery, extra set of SMART Pads III. All HeartStart FR3 cases are compatible with HeartStart Cabinets and Wall Mounts

 

Cases


861467 opt A01

 

AED Trainer 3

 

Training


989803171631

 

Remote Control for
AED Trainer 3

 

Training


989803150191

 

FR3 Training Pack

 

Includes Rechargeable Training Battery, Training Pads III, Interconnect Cable, External Manikin Adapter - Training Battery Charger sold separately

 

Training


861394

 

FR3 Training Battery Charger

 

Training


989803150181

 

Replacement Training Pads III

 

Use with Inter-connect Cable, Training Pads III

 

Training


989803150201

 

Interconnect Cable, Training Pads III

 

Training

 

861478

 

AED Signage Bundle

 

Includes: AED Wall Sign, AED Awareness Placard, and AED Posters

 

Wall signs, awareness placard and posters


861477

 

AED Wall Mount and Signage Bundle

 

Wall signs, awareness placard and posters


989803170921

 

AED Wall Sign, red

 

Wall signs, awareness placard and posters


989803170901

 

AED Awareness Placard, red

 

Wall signs, awareness placard and posters


861476

 

AED Awareness Posters (4-pack)

 

[opt. ABA English]

[opt. ABE Spanish]

[opt. ABF French]

 

Wall signs, awareness placard and posters


989803136531

 

Defibrillator Cabinet, Basic

 

All HeartStart FR3 cases are compatible with HeartStart Cabinets and Wall Mounts

 

Cabinets and wall mounts


PFE7023D

 

Defibrillator Cabinet, Semi-recessed

 

All HeartStart FR3 cases are compatible with HeartStart Cabinets and Wall Mounts

 

Cabinets and wall mounts


PFE7024D

 

Defibrillator Cabinet, Wall Surface

 

All HeartStart FR3 cases are compatible with HeartStart Cabinets and Wall Mounts

 

Cabinets and wall mounts


989803170891

 

AED Wall Mount

 

All HeartStart FR3 cases are compatible with HeartStart Cabinets and Wall Mounts

 

Cabinets and wall mounts


M3524A

 

Data Card Reader

 

Data management


861488

 

USB Bluetooth Dongle

 

Required when using Bluetooth Transceiver Module and some computer systems

 

Data management

Support

Find information on user manuals, product training, warranties and more.