1
  • 30 days return guarantee

  • Free shipping

Products

Controls

Reference
Symbol
Name
Definition
Note
IEC 60878 5007
5007
"ON" (power)
To indicate connection to the mains, at least for mains switches or their positions, and all those cases where safety is involved
  • Note 1 – The meaning of this graphical symbol depends upon its orientation
  • Note 2 – See also symbol 5264
IEC 60878 5008
5008
"OFF" (power)
To indicate disconnection from the mains, at least for mains switches or their positions, and all those cases where safety is involved
Note – See also symbol 5265
IEC 60878 5009
5009
Stand-by
To identify the switch or switch position by means of which part of the equipment is switched on in order to bring it into the stand-by condition
IEC 60878 5104
5104
Start (of action)
To identify the start button
Note – See also symbols 5177 and 5639
IEC 60878 5178
5178
Fast stop
To identify the control by means of which for example a process, a programme, a tape is stopped without significant delay
  • Note 1 – This means stopping either by electrical or mechanical disconnection.
  • Note 2 – On audio video equipment, the symbol 5110B is preferred alternative and should be used in combination with any of the symbols 5107B, 5108B, 5111B and 5124B
IEC 60878 5111A
5111A
Pause; interruption
To identify the control or the indicator which stops operation intermittently and keeps the equipment in operating mode
IEC 60878 5090
5090
Telephone; telephone adapter
To identify the terminals to which a telephone adapter is to be connected, and to identify telephone booths
IEC 60878 5004
5004
Variability
To identify the control device by means of which a quantity is controlled. The controlled quantity increases with the figure width
Note 1 – Only the linear version is given since the radius of the base of the curved version depends on the diameter of the control concerned. The curved version is shown in ISO 7000-1364
IEC 60878 5495
5495
Return to an initial state
To identify the control which returns a device to its initial state
IEC 60878 5503
5503
General cancel
To identify the control to cancel any of the services previously activated
IEC 60417-6334A
6334A
Selection; affirmative acknowledgement; success; ACK
To identify the control to acknowledge affirmatively and to indicate the status of acknowledgement, or to indicate the successful status.
IEC 60878 1326
1326
Acknowledged
To identify the control for Acknowledged
IEC 60878 0794
0794
Input; Entrance
To identify an entrance, for example, exhaust gas entry
for measurement (for example of CO- value).
IEC 60878 0795
0795
Output; Exit
To identify an exit, for example of an hydraulic pump.
IEC 60878 5264
5264
"ON" for a part of equipment
To indicate the "ON" condition for a part of equipment, if the symbol 5007 cannot be used, for example, to identify the "ON" position of a switch.
IEC 60878 5265
5265
"OFF" for a part of equipment
To indicate the "OFF" condition for a part of equipment, if the symbol 5008 cannot be used, for example, to identify the "OFF" position of a switch.
IEC 60878 5266
5265
Stand-by or preparatory state for a part of equipment
To indicate the stand-by or preparatory state for a part of equipment, if the symbol 5009 cannot be used, for example, to identify the "STAND-BY" position of a switch.
pause symbol
Pause; interruption
To identify the control or the indicator which stops operation intermittently and keeps the equipment in operating mode
Stop symbol
Stop
To identify the control or the indicator to stop the active function
Note: This means stopping either by electrical or mechanical disconnection