Consumer
Products
DesignLine Tilt LED TV

DesignLine Tilt LED TV

56 cm (22"), HD Ready, DVB-T/C 22PDL4906H/12

Troubleshooting

How to improve the picture quality of Philips TV?

In order to enjoy the highest picture quality available, make sure that your setup complies with the following conditions:

  1. Connect the signal source by means of a HDMI cable.
  2. Verify that the source signal is of High Definition (HD) content, which means either the 1080i or the 1080p video format.
  3. You will only be able to enjoy the full advantages of High Definition content if you connect your external device by means of a HDMI cable.
  4. If your external device does not have HDMI outputs, the next best option is the YPbPr (also called component or YUV) connection.
  5. Make sure the TV has the latest software installed.

If you use a direct cable connection from the wall outlet:

1) Check the incoming cable or antenna signal connection to make sure that it is properly secured to the TV's antenna input.

2) Although an analog connection does not offer the same quality, you can still obtain an excellent picture if you observe the following guidelines:

a. Check your cables and cable-connections.

  • Make all your cables as short as possible.
  • Use high quality antenna cable.
  • Connect the plugs well into their sockets.
  • Do not use an antenna cable splitter. Splitting the signal will make it considerably weaker.

b. Change the picture settings on your TV. The standard configuration is set to match the conditions in a TV shop.

You can use the smart settings in the TV menu to set your TV to a predefined picture mode that will give you the best picture quality.

Follow these steps to select the settings that suit to your preferences:

  1. Press the [Adjust] button on the remote control to access the Adjust menu.
  2. Select [Smart Picture] and press the [OK] button to display the list of available settings.
  3. Press the cursor [Up] or [Down] to select the predefined settings according to your preference.
  4. Press the [OK] button to confirm.
  5. Press the [Back] button to exit the menu.

Alternatively, follow these steps to select the settings that suit to your preferences:

  1. Press the [Home] button on the remote control to access the home menu.
  2. Use the [Cursor buttons] to select [Setup] and press the [OK] button to confirm.
  3. Select [TV settings] and press the [OK] button.

Follow steps

  1. Select [Picture] and press the [OK] button.
  2. Press the cursor [Up] or [Down] to select a setting.
  3. Press the cursor [Right] to select and use the [Cursor buttons] to adjust/set them according to your preferences.
  4. Press the [Back] button to exit the menu.

3) If you wish to set a specific format, you can use the [Format] button on the remote control to select a format that you feel comfortable with in the list of available formats.

The information on this page applies to the following models: 22PDL4906H/12 , 26PDL4906H/12 , 50PFL7956T/12 , 32PDL7906M/08 , 42PDL7906M/08 , 32PDL7906H/12 , 42PDL7906K/02 , 42PDL7906H/12 , 32PDL7906K/02 , 32PDL7906T/12 , 42PDL7906T/12 , 32PFL3506H/12 , 42PFL3506H/12 , 42PFL7603D/27 , 47PFL7603D/27 , 52PFL7403D/27 , 42PFL3403D/27 , 52PFL3603D/27 , 47PFL3603D/27 , 42PFL3603D/27 , 52PFL5603D/27 , 47PFL7403D/27 , 32PFL5403D/27 , 42TA648BX/37 , 47PFL5603D/27 , 42PFL7403D/27 , 42PFL5603D/27 . more less

Not what you are looking for?

Did we answer your question?

If not, contact us.