NanoCloud technology uses a natural evaporation process, which draws in dry air, adds water molecules to the air, and emits humidified air into the room.
Prevents the spreading of bacteria
Once the water is evaporated, the water mist becomes invisible and the smaller molecules are less able to carry bacteria into the air. Our laboratory testing confirms that NanoCloud technology spreads 99% less bacteria than leading ultrasonic humidifiers.
Prevents wet spots and white dust*
With its 360° design, humidified air is evenly distributed throughout the room, with no drips on the floor or desktop. Our NanoCloud technology also reduces the spread of minerals into the air, which prevents white dust from settling onto your furniture and flat surfaces.
Automatic humidity settings
Maintain a constant humidity level with the automatic humidity settings. Choose 40%, 50%, or 60% as your target humidity level, and the humidifier will automatically turn on or off to reach the desired humidity level. The Smart Humidity sensor enables the appliance to manage the humidity level. The numerical display also shows you the current humidity level in the room.
Quiet sleep mode
In sleep mode, the humidifier runs at minimum noise level and all lights are off except for the speed indicator. This setting ensures you can maintain your desired humidity level even when you are sleeping.
When using the timer, the humidifier operates for a set number of hours and automatically switches off when the set time has elapsed. Set the humidifier for 1, 4 or 8 hours.
2 fan speeds
The Philips Humidifier Series 2000 has 2 fan speeds and a humidification rate of 1.43 Gallons/24hours (225.52 ml/hr) on the highest fan setting. It is perfect for smaller rooms in the house, such as a bedroom, office or nursery.
A round and minimalist design makes cleaning easy. This humidifier does not have a heating plate, so descaling is not required.
No hot water
NanoCloud technology does not heat water, preventing the risk of burns from hot water or warm steam.
Fill with a jar or bring the water tank to the tap. The 'max' indicator shows how far to fill the tank. When the tank is empty, the humidifier automatically shuts off and the display indicates a re-fill is needed.
Prevents wet spots and white dust: Independent third-party test Determination of deposition of minerals from liquid droplets on furniture according to DIN 44973, IUTA e.V. To determine mineral deposits onto furniture from airborne liquid droplets over a period of 3 hours.
Up to 269 sq ft/25 m2: Room size is calculated based on humication rate tested by third party lab, following AHAM HU-1-2006 (R2011)
Results are based on emission of the bacterium Pseudomonas Fragi from clean units and filters, after 1,6 and 24 hours of continuous use, varying in water consumption from 30-120ml/hr, using sterilized water spiked with said bacterium, conducted in a 1m3(35cuft) chamber refreshed at 560L/min (148gpm)
Together, we'll make life better
We are making a difference to people's everyday lives, all over the world. With your help, we can make an even bigger impact.
Join our Better Me, Better World initiative and help us shape the future by choosing the cause that matters most to you. Then, enjoy 15% off your next purchase at the Philips online shop.